Blog & News

Yes. Cibes home lifts are certified to the highest applicable European safety standards. Active certifications include CE Mark, EN81-41 for residential platform lifts, Machinery Directive 2006/42/EC, ISO 9001 and ISO14001 for quality management, and SIL3 certification by Liftinstituut. The Royal Swedish Institute of Technology has tested the screw structural design to load capacities of up to 10 tonnes.

Yes. Cibes lifts are designed for installation in both new construction and existing homes. The minimum footprint is approximately 1 square meter. Cibes Lift Thailand conducts a free site survey to confirm feasibility and recommend the optimal location.

A Cibes screw-driven lift is installed in 5 to 7 days on site, depending on the model, the number of floors, and site conditions. A conventional hydraulic or traction lift typically takes 2 to 4 weeks to install. The shorter Cibes timeline is possible because the lift arrives as a pre-fabricated system with the shaft, platform, and drive unit ready for assembly. No machine room or pit construction is required (when using a ramp).

The smallest Cibes home lift footprint is approximately 1 square meter, suitable for a single passenger. Platform sizes scale up to large units that accommodate a passenger, a wheelchair, and an accompanying carer. Cibes offers up to 41 platform sizes across the V-series, so the lift can fit narrow stairwells, corner installations, duplex voids, and unusual floor plans. Cibes also has a larger A8000 Extra able to fit medical beds.